2048wh power station help

[Jpalmer]

Hi everyone and thank you for allowing me to join , been reading a good bit but I just want to make sure I get this right ..
so I have 4 panels that was gifted to me
2- 270 watt Canadian solar
Vmp 30.8v
Imp 8.75amps
Voc 37.9 volts
Isc 9.32 amps

2- 195watt ecoworthy bifacial
Vmp 19.8v
Imp 9.85amps
Voc 23.7v
Isc 10.5 amps

Can these be put into series parallel , I know everything I read says as long as they are close but the seem a little further apart .. my power station can take 1000watts max 12-120v/15 amps? Thank you

 

[Mattb4]

I would use one or the other pair of matching panels only as input to your power station. The panel specs do not lend themselves to trying to use all 4.

Save the other two for use with a different SCC.