SHOTO SDA10 48100

[Taher Sylla]

I have a Shoto SDA10 48100 15S lithium battery

It is working perfectly fine but it has one major problem, the charge current doesn't go higher than 10A, while it can be charged with much higher amps, any solution?

C.V = 53.2v ( also tried 54.5 )

The charging parameter on my inverter is 40A or 30A ( Growatt SPF 3500 ES )

 

[houseofancients]

Are your cell out of balance in it ?
Some bms'es limit the current to 10a if there is an alarm on cell level

 

[AmerAli]

I have a Shoto SDA10 48100 15S lithium battery

It is working perfectly fine but it has one major problem, the charge current doesn't go higher than 10A, while it can be charged with much higher amps, any solution?

C.V = 53.2v ( also tried 54.5 )

The charging parameter on my inverter is 40A or 30A ( Growatt SPF 3500 ES )

Hello Taher,
It's nothing to do with the inverter or the state of the cells.
You will have to disable the charge current limiting in your BMS.
So simple if you have the bms software

 

[Taher Sylla]

Hello Taher,
It's nothing to do with the inverter or the state of the cells.
You will have to disable the charge current limiting in your BMS.
So simple if you have the bms software

Yes I did it and disables the current limit, it is now working fine, I got the software from the SHOTO they sent it to me, Thanks