shadowmaker

Does your MUST have CT coils (=does it know when it is importing/exporting, the arbitrary line between you and your utility connection)...

They were tough like six inch nails, but we are more like latte people with raised pinky finger nowadays. Me included.:sick:

True. I got everything to start building my next array of panels, but not with this heat. Also there has been so much production lately...

On a more serious note we had an extraordinary May here. Usually one or two over +25C days and now something like 15 and full sun every...

Well, at the time I got suggestion to go with 16S with my panels from Deye tech, I didn't know/have the time to figure it out myself as...

I have a flip out 235w pannel at my offgrid cabin. When I'm not there it lays against the wall. It's just hinges bolted directly on the...

1500 means that Deye will supplement your power needs max 1,5kW from battery. The rest needs to come from PV/grid. As you have 14,3kWh...

Well, I do look like evil elf, but north pole is still few hundred km from here... 🤣 Yes. With bifacial panels and white wall behind...

Maybe remount the panels via hinges at the top and use strut or another simular material as a variable length leg at the bottom to make...

I'm sure this could have been done better/cheaper/stronger. I'm not an engineer. It was just something that came to my mind. It has been...

I thought that I had left enough buffer at 11s. But the first winter I had an over voltage on a cool sunny morning. Luckily, my Growatt...

You’ll only slightly destroy it. Kinda like being a little bit pregnant. 😁 As an EE I’m on the side of “if that’s after your worst case...

Deye engineers told me to go with 16S with my panels (gave them specs). This was before I had no knowledge what Voc even means. Hard...

We figured out how to put 1500 in each timeslot. We had to hold down the Up arrow instead of tapping it repeatedly. Looks like it...

WTF? Do you have app (Solarman Smart or Deye Cloud)? I bet you can change those numbers from there. At least I seem to be able to...

Change "power" setting from 0 to 1500 (05.00-17.00) in "Time Of Use" table. If you can backfeed grid enable "Solar Sell". Edit. You...

Or just plain stupid.

Not familiar with this but my manual says (page 34, Time of use): "Note: when grid is present, only the "time of use" is ticked, then...

Yes.