P pctree New Member Joined Jul 14, 2022 Messages 56 Aug 20, 2022 #1 So I have 6 of these cells GNB H1T-41 They are flooded lead calcium with 4000ah capacity and weigh over 500lbs each. Any input on how to desulferize them ?
So I have 6 of these cells GNB H1T-41 They are flooded lead calcium with 4000ah capacity and weigh over 500lbs each. Any input on how to desulferize them ?
T time2roll Solar Wizard Joined Mar 20, 2021 Messages 5,842 Location SoCal Aug 20, 2022 #2 See page 4 Table B
S Steven Revis New Member Joined May 11, 2024 Messages 2 Location Hawai'i Island May 11, 2024 #3 PCtree, did you ever find anything to help?
S Steven Revis New Member Joined May 11, 2024 Messages 2 Location Hawai'i Island May 11, 2024 #4 pctree said: So I have 6 of these cells GNB H1T-41 They are flooded lead calcium with 4000ah capacity and weigh over 500lbs each. Any input on how to desulferize them ? Click to expand... Did you ever find help? That table, I clicked but just took me to a sales site.
pctree said: So I have 6 of these cells GNB H1T-41 They are flooded lead calcium with 4000ah capacity and weigh over 500lbs each. Any input on how to desulferize them ? Click to expand... Did you ever find help? That table, I clicked but just took me to a sales site.
O OzSolar Whatever you did, that's what you planned. Joined Jan 5, 2021 Messages 2,777 Location Southwest MO May 11, 2024 #5 The link in my signature line will take you good read on deep cycle batteries. An equalization charge is probably the most effective way to desulphate a battery.
The link in my signature line will take you good read on deep cycle batteries. An equalization charge is probably the most effective way to desulphate a battery.
Daddy Tanuki Solar Wizard Joined May 11, 2021 Messages 2,408 Location Flanks of Mount Fuji May 22, 2024 #6 on a battery that large get an older AC/DC buzzbox welder, set for DC and set the voltage and then measure the output voltage to meet your battery banks need and then feed it amps till it starts boiling. vent well and watch the water level.
on a battery that large get an older AC/DC buzzbox welder, set for DC and set the voltage and then measure the output voltage to meet your battery banks need and then feed it amps till it starts boiling. vent well and watch the water level.