Seplos bms 3.0 Is died?

[jolly12f]

hello everyone I write from Italy, I have a seplos 3.0 bms on a seplos polo w battery. unfortunately today after the firmware update the bms no longer works, all the leds are flashing and the rs485 port is no longer detected by the pc, so i can't launch the update again. can some good person tell me if there is a way to recover my bms or is it to be thrown in the toilet?

 

[tommydirani]

try connection via Bluetooth and reset the parameters.

 

[Neil H]

try connection via Bluetooth and reset the parameters.

You can't

Bluetooth on v3 is monitor only you can't alter any settings

 

[tommydirani]

you can alter but you need password

 

[jezmhill]

does anyone know the password?

 

[dream65]

does anyone know the password?

Try with :
user: admin
pw : admin

 

[michael620]

PW: 111111

 

[beckkl]

The password for the .apk for the BMS version 3.0 is not 111111, it is seplos111

 

[Archerhuter]

hello everyone I write from Italy, I have a seplos 3.0 bms on a seplos polo w battery. unfortunately today after the firmware update the bms no longer works, all the leds are flashing and the rs485 port is no longer detected by the pc, so i can't launch the update again. can some good person tell me if there is a way to recover my bms or is it to be thrown in the toilet?

First, you need to choose the right firmware, if you don't, your BMS will die if you update, there is a file on the Seplos website telling how to choose the correct firmware for your BMS

 

[crossy]

First, you need to choose the right firmware, if you don't, your BMS will die if you update, there is a file on the Seplos website telling how to choose the correct firmware for your BMS

Yeah, there are warnings all over the website and BMS documentation not to update the firmware unless a Seplos tech tells you to.