Yes, Georgia is NEC2020. I've seen other threads here which indicate that UL9540 is only required in California, and UL9540A (batteries alone) is the national standard.
Here's one example: https://diysolarforum.com/threads/paired-vs-non-paired-ul9540-requirement.68238/#post-861979
Hence my...
I did look at Pytes, but they don't publish pricing so I moved on. I landed on the Ruixu from Will's video, and his strong recommendation. The price is excellent.
It's not 50K, it's 30K after tax credits. I think you're confusing ROI and payback, I get ROI the very next month when my...
Hello,
I was hoping to get some feedback on a quote from a custom installer.
Inverter
Sol-Ark 15K
Optimizer
26 X Tigo TS4-A-O + monitoring & shutdown
Panels
26 X REC 420AA Pure 2
Total System Price - REC : $34,725.60
or
26 X QCells Q.PEAK DUE BLK ML-G10 + 410
Total System Price -...
I am looking for a quiet solution to maintain my 12V 200ah Office Backup, which is setup as a DIY UPS.
I have a
- 200ah 12V battery
- 2200 watt Inverter
- Victron Smart Shunt
- Automatic Transfer switch.
These keep Router/Internet/laptops/microservers up and running for 24hrs. Great!
The...
Current Connected site clearly shows you want the Pytes if you want closed comms with solark as a supported configuration
Sol-Ark will happily do closed-loop comms with anyone that supports the protocol. They advertise "Any Battery", and they list more than 20 supported battery vendors...
A Daily usage numbers is not practical. I have zero knowledge on the load of a water heater, for example. I also have zero knowledge which setting (low, medium, high) for the Air Conditioner I'll be using, or what a typical runtime will look like in the southeast.
The reality is that :
1...
Is everyone still happy with the Riuxu batteries? I'm considering the 10-battery rack to pair with a Sol-ark 15K.
Any issues getting comms working properly?
How does expanding the bank work if you have closed-loop RS485?
My inverter has only one RS485 ports. Is it possible to add a completely separate additional bank, and somehow have it be closed-loop as well?
My guess is that once I pick a battery manufacturer, I'm essentially stuck with that...
Interesting. It is grid-tie. The Ruixu batteries are UL listed under 1973. Can you point me to more information on UL requirements?
No. 10 100ah 48V batteries, so 48,000 WH. My bad.
Thanks! Yes, I have a gasoline "diesel heater" in the plan. I didn't list it here as it's not a material electrical load. Interesting thought on the shorepower, I actually don't think I'll get many chances to use even 30a, as we'll probably be totally off-grid more often than at a...
195 is the fridge model number. It pulls 4A at 24V. Not a concern for max current, but a concern for total energy over time.
I neglected to mention I'd use a Lynx Distributor for the busbar, and planned on landing the AC on that. So I'd need big cables from Battery to Lynx...
I guess this is the root of my question: What is the sterling ground path with a Chassis ground?
Is the charge flowing:
Lynx Distributor Negative Bus Bar - > Chassis Ground - > Sterling B2B - > Chassis Ground - > Ford Battery Negative?
Or are they going to skip the B2b entirely, and just go...