Dominic's latest activity

Go That’s fair. I need to install this in my garage (90ft away) for the next 8-12 months so was hoping to not spend the extra on 8awg...

I used 6 AWG 50amp bypass x1.25 = 62.5

I looked at the manual. It just says 50a bypass. But what if I don’t want to or plan to run such a heavy load.

That’s what I meant to say!

The manual should have recommendations.

What’s everyone running? I was planning on 10/3 on a 40amp 2 pole (240v) breaker from the main breaker box to the line in on the...

How about for residential purposes

Is there regulation as to what metal can be used for code?

Haha I am thinking about it actually! So none of my work should be permanent. I’m in Seattle, so not much snow. It does get windy...

How much would the protrude? Keep in mind the extra windforce if it can easiliy catch up under the panels! I am not a static expert, but...

So I’m getting ready to install panels onto my sheds asphalt shingles and as I’m up there doing my calculations I’ve noticed my...

Following as I have a very similar project

Thanks everyone for the input. I’ll play with this for a Little bit, max it out and then see what’s available.

Actually misrepresentation. Not using the full name, implies that it's something that it's not. It's not an 18k AIO. But, it does...

Actually a reall Actually a really simple nice thing to say! I’ll do just that.

you bought the battery and the 6000, put it on the car port like you planned, and see what it can run, in Seattle. post your progress!

May also depend if you need UL9540 on the battery-inverter combo. Last I looked the PowerPro is UL9540 but only with the 18Kpv.

I'd vote the 18K as you won't need to buy more inverters as you expand.

Yes yes yes - semantics

Yep, I understand that. Truefully im probably a couple years away from really devoting myself to installing the 18k as an actual hybrid...