Hello,
I would like to share with you my battery build, after seeing videos on Nate's DIY youtube I decided to do the same:
I chose cells from 18650batterystore the LF280K grade A, and the standard heated kit V4 with heating.
The total cost for cells was $644 delivered to Virginia and $373...
Shocking how fellow republicans are not acknowledging this guy. Sharp, self funded, not under the control of a super pac, and is a minority so the wokies already disarmed with the usual racial bs they use to get there point across.
I built the V4 kit with heating from Sun Fun Kits and it went together really well I also made a build thread. I used cells from 18650batterystore but I wished I had used the REPT 280 cells from Sun Fun Kits as the 280K test to around 278 where the REPT are in the 290 range. So overall happy...
I will be setting 2 Tiny Homes fully electric, they are going to be 120v only. Battery setup will be 48v.
What is the best inverter for the price I'm looking at the 3000 watt 48V EG 4:
The other would be a Victron 48v
Open to other suggestions, but need to keep idle current low which is...
I just watched the EG4 6000EX video and compared it to the 18KV, there is a very big price difference, 2x of the 6000ex are less than half the price of the 18K.
What are the main reasons for the price difference except for selling back to the grid they seem to do the same thing?
Testing fees...
What are the best solar panel setups for a trailer where you have a 8.5x24 area to cover. Also if anyone has some type of setup where you can slide out additional panels form underneath, Please share. Ideally we have an array in the middle and 2 sliding arrays that come out on the left and...
Does anyone know if this is required if using double hole cells?
I have some 280K and they have these terminals, I did not sand them to remove the anodizing.
So I got my cells from Sun fun Kits last week I ordered beginning of September and it took about 80 or so days to arrive. I probably delayed it a bit because I wanted the flexible bus bars so maybe added a week or two.
It was a good transaction for the most part I called them probably 3 or 4...
I'm using this bms:
https://jiabaidabms.com/products/jbd-smart-bms-3s-4s-100a-120a-150a-200a-lithium-lion-battery-pcb-with-uart-heating-function-series-connection
and these heating pads...
What is the best price on 32 or so, may be possibly 48 cells grade A 304. Not looking for grade B, they will need to have the test report. I can wait for delivery.
This is going into a tiny house that will be running a LV6548 inverter.