FPD218

I self installed an ICM Brand soft start on my home a/c condenser and it also works great. 3 ton unit and it dropped the startup amps...

Dawn dish wash soap

From 2 of my arrays today, s/e Wi

What's your a/c's continuous current draw? Are you calculating a/c runtime based on a 100% compressor duty cycle? We use a 12v...

Soft start kits are PRICELESS

What is your plan for storage batteries?

No problem, yes it's a high efficiency condensing gas furnace, inducer fan is only 285va inrush, the blower motor is a ECM motor, inrush...

So how’s the phonix handle the furnace inrush? Do you have a draft fan/power vent on the furnace?

Dang, that’s pretty.

You have the red and black wire in the wrong side on your DC circuit breaker. The red is positive and it needs to go on the right side...

Two Golden rules in solar..... 1) Your system is never big enough 2) Always plan your design for expansion.

Oh yea no way it needs to vent then

Battery box is located inside my house in the basement in a temperature and moisture controlled atmosphere @65 degrees Fahrenheit. There...

I wouldn't expect it to be a problem. Just monitor it for the first day, to be sure.

That's smart plug controls my original solar setup that was running the furnace. I did this stand-alone system for the furnace so that I...

Biggest discharge will be 26 amps when the furnace is on which is intermittent and cycled 2-5 times per hour depending on ambient...

Very Nice clean setup, even the smart-plug (love it). With LFP a Sealed Box is FINE ! Provided that the BMS is free & clear of...

2 DALY 100 amp out 50 amp in BMS's no fan on BMS