Recent content by Gttnsun

Is it common for the lines to be on one side or the other of the inside unit? What is common for doing a rough in of line sets? Any special bracket? I don't want sheetrock guys screwing up the linesets. Do the lines need to go straight down or can they go over and then down? For example can the...

Hello What do you all think about running mini split linesets inside the walls for new construction? I am about to do insulation and sheetrock and I am kicking around the idea of putting the linesets inside the wall. I could put them on the outside of the wall later but then I will have the trim...

They are expensive, but it was the only UL9540A testing I have seen that lists data of how the test was performed. There are other batteries that are UL9540A certified. Maybe some of those companies can provide that data too? Just for clarification UL9540A and UL9540 are too different things.

Here is the Fortress power UL9540A testing. According to the paperwork they abuse the batteries with very high temperatures to see what will happen. Having the right battery will definitely reduce your risk of fire...

UL 9540A is a battery certification for fire and thermal runaway The manufacturer pays for fire related testing to get a battery system UL9540A certified Most jurisdictions want UL9540A certifications for permitted installs https://www.ul.com/services/ul-9540a-test-method

Im my situation they just wanted cut sheets for every component listed on my single line diagram, no cut sheets for emt or wire, but I did include a cut sheet for my dc disconnects from my panels. Do you have a single line diagram?

Here is a cut sheet from a Schneider XW Pro inverter and Hanwha Q cells 480 solar panels

I turned in a cut sheet that has technical specifications for every component when I recently applied for a permit. Sometimes they are called data sheets. I included one for every component listed on my single line diagram The permit was approved

Expand everything in the ac2 settings to the widest range possible and see what happens, you can fine tune it if you get it to qualify. What is your charge rate set to? I'm not sure if the bonded neutral has a effect on qualifying, but it could be your problem that is why I asked.

Does you generator have a bonded nuetral?

They are expensive, if you have alot of connections it probably doesn't make sense.

Polaris connectors?

Does anyone know if the 36.4" height is measured with the feet extended all the way out? Or is 36.4" with the feet all the way in? Maybe the feet could come off? My roof height is limited

I agree

I had a problem with the E12 Base Candlabra bulbs flickering when my washer was on the spin cycle. I tried a few different bulbs and finally bought the Phillips flicker free E12 base candleabra bulbs, they work great with no flicker.