justgary

In order to measure power you need to measure volts and amps at the same time. Open circuit voltage is not the same as voltage under...

Been working on this one over the last month (after getting back to my art work). Red-Breasted Nuthatch - Final by Kenny A. Chaffin...

Photos of the completed diesel engine swap on the log splitter and some of the wood I got last week. and lastly broke my forklift...

Minimum charge at my lake place is now $35 per month, and that includes no energy usage. I'm happy with off-grid.

KWh

Looks like a Wheel Horse to me. Very versatile.

You are missing out on the Zen of welding. Keeping a decent bead while shaking the slag out of your flip flops is only possible by...

If you have ever showed how you actually hold the coils down, I missed it in the remainder of the discussion. I don't see any bosses...

But your peak isn't 9.8v, your peak-to-peak is 9.8v. You still need to divide by two.

You seem to think that owners of a company should not get compensation for their investment. It is rather obvious that you have never...

The big problem I have with this is that you have to disclose you're income (tax returns?) to the utility company (or govt) so they can...

Would that it were so simple. The RMS (DC equivalent) value of a sinusoidal AC waveform is 70.7% of half of the peak-to-peak voltage...

read them and wheep. 8.4 amps at 9.8 V 82 watts!!!! not too shabby for a mere 5x litz 0.4mm wire at 35-70-35 coil now is it? I...

I bought some really good Orgeat a few weeks ago while on the eclipse trip, so I opened it last night and made a couple of Mai-Tai...

this one is so good that I for real have had belly laughs at times all the way to this moment. sure moments apart but still. it has...

Okay, closing the loop on this one! Finally got a chance to flip things and we are good to go! Thanks all for your help!

Amiga for the WIN! I have nearly every model, still working!

I put engine valve springs on my compression threaded rods. Measured how much squish I needed to get on the springs to get 150lbs of...

Wood case $12 Bus bar $50 Breaker $30 Cables you need with either pre build or diy. My time is free spare time because I would be on...

We just keep taking a stab at it.