Most reacted posts

also the wind should be cooler to an extent blowing over the water before the panels to also aid in cooling which makes a large difference in efficiency. maybe ill set up a pump to mist the back side of the panels for extra cooling lol might be a fun experiment to look into. obviously only would...

have you tried preheating it before mig welding? i have a miller 250x and if that wont work ill break out the old arc welder and i can weld anything with it if it comes to that. the mig is just easier and faster.

is this just using its own weight to hang on the edge of the corner?? or is it also anchored down. i kinda like those brackets. did you make those or buy them?

they make little floating solar fountains that run when they have sun aka when the panels would be hot so it would do all the hard work for me and i would only have to hook the pump up to a piece of pipe with a few misters. could easily see if it helps with only $200 to experiment with. iv spent...

if someone reads this and beats me to the experiment please post your findings! as i wont have a pond with enough water in it till the end of summer at best.

located in missouri and my 20ft was 3200 delivered and that only cause i know the guy well. 3k seems pretty normal for where im at and 4k for a 40f wishing i had a 40ft container now but that extra 1k wasnt in my budget at the time. might be trading my spray foamed 20ft for a 52ft non insulated...

WHATTTT?? how did i miss this video. I will be looking for this right after work. im glad you said something though cause im very very close to buying a new bigger system for my off grid setup (currently running a eg4 3k inverter) but if that is coming down the pipes i can wait some time. just...

im not familiar with this particular inverter but usually there are communication cables that need to be attached unless its one of those stacking batteries like the e cube but even still some of those require communication cables. maybe skim through your manual for the word communication and...