muaddib721

Not using the 6500s anymore, but I figure if the 18Kpv has some sort of issue, those can be a backup.

I have three EG4 Power Pro batteries and I always top balance my batteries prior to connecting. So I took a pair of battery cables from...

I asked pretty much the same question in the following linked thread and got a reply from the owner of EG4.... you would use the...

After updating the firmware on all the batteries they've been running great. I have recently had a few times when the inverter is...

Battery type is 00... and yes as you can see in the pic i have the EG4 conduit boxes on top of each battery and then I ran connections...

My system consists of two Sol-Ark 15ks in parallel, with 3 EG4 Power Pro's, and 6 EG4 LLV2's shared to both inverters. So far...

I've been curious about the Ruixu batteries and the 15k as far as coms... you're having no issues at all? Are you off grid or still...

Thanks

Make sure all batteries are up to date on firmware on both com ports, and that each battery is set to the Sol-Ark protocol. On the...

Nice looking setup…

I also have EG4 Power Pro Batteries. Works well. One thing to calculate first is how much cabling you will need to attach the "master"...

Zero, I’d like to see what weird output readings you’re getting on the load side? Are you splitting the battery com to use Solar...

Works with the EG4 Power Pro batteries. I have two 15ks and 3 power pro batteries and they work great.

Sounds like a good excuse to buy a pallet of panels for direct PV charging. The answer is always more solar!:)

The non-BB components are about $2300? So they want roughly $10K (regular pricing) for their batteries and labor to assemble?? But the...