Good Morning,
I'd like to purchase a few rack mount batteries and I'm considering the EG4's from Signature Solar.
EG4-LifePower4 Lithium Battery | 48V 100AH - $1500
EG4-LL Lithium Battery | 48V 100AH - $1700
Is the additional $200 for the EG4-LL worth it over the EG4-LifePower4?
I'm not...
Have you tried the SolarMan app?
https://home.solarmanpv.com/login
https://pro.solarmanpv.com/login
I'm currently using Solar Assistant which runs locally on a Raspberry Pi, but can be accessed from any internet connection.
https://solar-assistant.io/
To follow up on this in case anyone else has similar questions:
EG4-LifePower4 - 5 year warranty
EG4-LL - 10 year warranty
It also appears the EG4-LL should stack/parallel easier due to the location of the breaker.
"It would be worth it to me to get the 2x warranty and the LCD. Plus you get...
This is the response I received from LuxPowerTek in regards to firmware release notes:
"Adam informed us of the assistance for the firmware udpate .
And the optimization for the firmware udpate : 1. AC coupled solution is added 2. control logic with the generator"
Thanks for the quick reply.
The installer is recommending the smaller unit - 10kVA 120V. I think that's because he has that model in-stock, and the 230V would have to be special ordered.
Looking at the Victron's documentation, it shows the following:
AC inputs (2x) Input voltage range...
I just ran a few more tests with the grid breaker ON.
I'm experiencing the following behavior:
When I turn on the microwave, the circuits with the dimming lights:
110V -> 91V
When I turn on the microwave, other unaffected outlets in the home:
125V -> 145V
The affected circuits are normally...
I have 32x 280Ah EVE cells arranged in the following configuration. (2P16S)
I'm using a JK BMS (Model# B2A24S20P)
Should I have the battery capacity set as 280Ah or 560Ah?
I'm trying to obtain the release notes from LuxPower, and they're asking for the serial number.
Can anyone provide a serial number I can send to them? My inverter is still en route from China.
Thanks!
I can't seem to push more than 75 Amps when charging batteries via solar.
I have the following settings applied:
Max discharge current: 125.0 A
Max charge current: 125.0 A
I'm currently generating ~11kw. 4k is going to the batteries, 4k is going to the load, and 2.4k is going back to the...
Can anyone recommend a specific JK BMS model for my use case?
I have 96 cells arranged into 3 banks (32 cells each). See image above.
I will need 3 BMS's, one for each battery bank.
I'm looking at the HankzorBMS Store, and I'm a little confused by the different options.
Are these all pretty...