Most reacted posts

I have 2ead acid deep cycle Marine, and 2 deep cycle AGM, I will put each pair on their own Solar Charge controller

I wanted to make sure it wasnt something i did. Okay i will contact daly

I purchased 16 cells for 34.74 each plus shipping from China at alibaba, it was 732.00 to the door with busbars and shipping included. They are 105ah each and I used 2 cells in parellel and then 8 of those in series to make a 24v battery. I only had a saws all so making a box to silp them into...

I purchased 8 cells of 75ah to build a 24v battery. I cut fiber board and surrounded the cells and compressed slightly. I purchased a Daly 8s 100Amp Sodium Ion BMS. What I received was a Lifepo4 BMS with BMS settings. I used (user defined) and all the range necessary for Sodium Ion is within any...

Im reading that the Victron 100/20 is the largest solar controller with low voltage shutdown of 47.2VDC , to the load port. I actually have a make sky blue new in the box some where i never opened, and i see this 60 amp controller also has a low voltage shutdown, i need to research this one...

Not the same model

I just bought 8 cells of 80AH lifepo4 batteries to build a 24v battery, and I need the terminal connectors. Where can I buy them all ready made?

But not for just the connectors

Like the battery to battery in this photo

I have lugs and a crimper, I don't want to smash copper pipe and drill

I have been told that some Solar MPPT charge controllers have the capability to adjust the low voltage cut off on the load portion of the charger. Actually the load is only meant for a light bulb or Two(2). My goal or desire is to set the load voltage to shut off when the voltage gets down to...

I have 2 AGM 75AH 12v batteries, and 2 Large marine lead acid batteries. Can I wire the 4 of them into 2 24v batteries and then run parallel to a 24v solar charge controller or do I need to make 2 separate systems, using 2 separate charge controllers?

That model is not on the list. It shows a 5kw split phase on the site, the one in the video is not that model

The first is a smaller 400 watt, but I need the battery to battery terminal connectors. Who sells them?

This doesn't show the one in the video, it only shows what you can Select from

I can make these, I'm looking for the flat bar style

Okay I will just build my own, thank you for all your help,

The inverter will be connected di I will connect the inverter directly to the Batteries, with a relay disrupting current flow. I want to use the load settings and the load to control the relay when the battery voltage drops to 24V, should i draw a picture? All im asking here is what models of...

Thank you

Yes all 4 batteries are deep cycle

Thank you, separate charge Controllers they will have.

Thank you

In Will's video about a complete lifepo4 system, he talks about using a separate port BMS to not stop power to the charge controller. Can we get a video, showing the proper build that will not allow the charge controller to be damaged, like when the common BMS is used.

No replys??

Will made a video putting together a 48v mpp all in one system about 5 months ago. In the video he said that unit was the smallest 48v made by that company. Does anyone know the model number? It must have slipped wills mind to explain what model he was assembling.

when using a seperate port BMS on a Lifepo4 battery, were do you place the shunt? on the battery where the Blue wire attaches, as this is the charging and draw point. The load wire would only measure the outgoing load. Would this be correct? place the shunt on the battery negative and then...

In one of Will's videos he mentions that a separate Port BMS will continuously keep the electric going to your charge controller even after it disconnects the charging to the battery, therefore your charge controller will not be damaged, by only beiing connected to the solar panels. I'd like...

I purchased 8 lifepo4 batteries from ebay that are supposed to be 80AH. They don't look new, What should an 80 AH lithium iron phasphate battery weigh with plastic case? Where can I buy the meter that's used in all his videos to determine AH of the batteries. How do I tell if I got used 100AH...

What was the amp rating of the separate port BMS that only provided 10 amps of charging.

I understoood all but the last line: Common Charge/Discharge Terminals, Separate BMS for each series group.