Recent content by YasenV

Figured it out. Just connect the caravan as it is appliance and ground rod it.

Hello Guys, I am planning to make a caravan static as hut. I have solar, Lifepo4 and Epever IPT-2000 Inverter. The caravan itself has a 3 wire installation with live, neutral and ground (it is European so 220V). I am planning to attached the inverter on quick connect of the caravan. But while...

Hi Lorenzo, my setup is with lower amps rating, so I went for 60AMP SmartBMS, I see they have high amps as well versions.

So just extend the cable to achieve voltage drop?

Normal, maintenance and fast are the 3 options (fast should be 14.5 absorb and 13.8 float)

Yep, there is no much of documentation so I contacted them and here is what they said. Normal - Constant voltage 13.8V Maintence - Constant voltage 12.5V Fast - Boost 14,5V and maintance 13.8V.

It is Arsilicii Al320-RC - central powerbox for Rimor motorhomes - it is Italian brand popular in Europe.

Mine has no settings or potentiometer unfortunately. 3.45 is high for floating, this is what you mean. I have reviewed several videos of Will and 13.8 is acceptable by battleborn for example. Anyways, in fact there is a risk here.

I will go over the topic for sure. My question is rather, I am putting the battery at risk with constant voltage of 13.8, it is not important to be fully charge. I have solar + alternator via dc to dc charger as well.

Hello Guys. Just want to confirm something. I am preparing Lifepo4 bank to replace the AUX battery of my motorhome. I have a charger in the motorhome and in case it connects to mains it will try to charge the AUX battery. It has few settings: Normal - Constant voltage 13.8V Maintence -...

On the image shunt is between SCC and BMS, so it won't count the BMS consumption, which in general should be neglectable anyways.

In general what is the recommended position of the shunts between BMS and battery or after the BMS? 1. If it is in between it will measure the consumption of the BMS itself, but there is a chance it can drain the battery since the BMS won't stop it. 2. If after - BMS protects the battery but we...

Anyone?

Hello Guys, I have managed to get my hands on 40 cells made by GP - http://liionbms.com/pdf/goldpeak/GP45EVLF.pdf Divided into 4 packs it seems 3 of the packs are in good shape, one is seems to be not really well. 2 - cells are with damaged isolation and my guess is they shorted out creating a...

I am android, but have access to IOS just in case.