They are back in stock (3000 units available), and after looking them over and asking Tom (owner of battery hookup), a daly bms is what most people are using. I should also add, that they do not have low temp cut, so you need a victron controller w/ battery sense (with low temp cut off enabled) if you wish to use it with solar.
Because I am getting a lot of emails about this, lets throw together a battery package so that you do not damage the batteries (affiliate links below):
- Click Here for the Batteries. And use coupon code "SOLAR" (my affiliate code) for 10% off entire order
- Click here for a 200 amp Common Port 8S Daly BMS (if you need more than 200 amps, use a 500 amp relay, and trigger it with this bms)
- Click here for victron SCC's. Be sure to add a battery sense and enable low temp protection.
- If you want check the individual cell voltages, click here for a balance lead and click here for a cell monitor
So yeah, pretty simple battery to use at a good price. The next thing you guy's need to know is that the shipping charges are extreme unless you order more than one battery. So it is best to order multiple batteries, or pick them up at the warehouse (1375B Adams Road Bensalem PA 19020 )
Let me know if you guys want to know more about these batteries. Pretty simple to use and require your own low temp cut off, but crazy cheap!
Last edited: