diy solar

diy solar

Difference between Victron chargers

SoakedUp

Solar Enthusiast
Joined
Apr 3, 2022
Messages
270
Can anyone elaborate on the difference between these three chargers from Victron besides their IP ratings, physical size and shape, and amperage output.




Struggling to figure out if they have different features or intended uses for each one.

I’m leaning towards the IP 65 but the 12v version seems to top out at 15amps which is fairly low.

Thanks in advanced!
 
"IP" is a rating based on "waterproofness"


Suggest you read the datasheets and pick the charger that offers the features you want/need.

Yes. Thank you for that. I already had a pretty good understanding for IP ratings. I’ve also read the data sheets for each and they all appear to have the same features for the most part besides IP rating, size and shape, and amperage ratings and cost. Are these the only differences? Are there intended uses for each charger? Seems odd victron would create such similar chargers and not just redesign one to be more waterproof.
 
Yes. Thank you for that. I already had a pretty good understanding for IP ratings. I’ve also read the data sheets for each and they all appear to have the same features for the most part besides IP rating, size and shape, and amperage ratings and cost. Are these the only differences?

Pretty much.

Are there intended uses for each charger? Seems odd victron would create such similar chargers and not just redesign one to be more waterproof.

Victron is huge in the marine world, so water resistance is sometimes critical.
 
The IP22 has an internal fan and is available in higher output current than the sealed units, also versions with multiple outputs.
The IP22 and IP67 versions operate up to higher temperatures than the IP65 version before reducing charge current .
For permanent mounting in a building or a RV the IP22 would be my choice, charging a vehicle outside as a temporary measure, the IP65, and if fitted in an exposed position the IP67.

In use the IP65 reduces charge current above 30 centigrade and with its compact size this is likely to occur.

Mike
 
The IP22 has an internal fan and is available in higher output current than the sealed units, also versions with multiple outputs.
The IP22 and IP67 versions operate up to higher temperatures than the IP65 version before reducing charge current .
For permanent mounting in a building or a RV the IP22 would be my choice, charging a vehicle outside as a temporary measure, the IP65, and if fitted in an exposed position the IP67.

In use the IP65 reduces charge current above 30 centigrade and with its compact size this is likely to occur.

Mike
Thanks Mike. That pretty much answers my question.
 
Back
Top