Search results

Looking to cover a pergola with Bifacial and can’t seem to find in any cut sheets if the panel is transparent around the cells. Anyone have any recommendations that would allow some light to pass through around the cells? Thanks in advance!!

Folks, wanted to see if anyone has found a US available equivalent fan for the DZ08038B12HH installed in the LV6548. I've had an intermittent fan issue that I've neglected which has now caused one of the three fans in one of my inverters to fail making my system inoperable. I know there are a...

Wondering if anyone has seen the Warning in the title. I’m only getting it on one inverter, but the fans in that inverter are running at full speed it seems even those I’m at a relatively light load. Room temp is in the 60’s. Any ideas?

DIYrs, I'm trying to pinpoint why my Bus Voltage drops from a nominal 230-240V on grid bypass down to ~210V when on batteries. Running 2x LV6548s with 4x EG4 LiFePower4s. I feel like there is a logical reason why, but it's not making sense to me since my inverter AC output is holding strong...

Just had my first system fault today. Lost all power on both LV6548 this afternoon. First was showing a F52 fault “Bus Voltage too low” then I disconnected batteries and AC input and then brought the batteries back up and the 2P2 came back up fine, with 120VAC output, but 2P1 then threw an F09...

I'm looking to see if anyone has an extra, or no longer needed, Growatt 5000ES? Just need one. I'm in Houston, TX. Thanks!

Folks, I’ve been up and running just under and month and now have all my homes loads moved under my dual LV6548s. I noticed after moving everything off that the inverters are still pulling about 0.5A each in SBU (Solar/Battery/Utility). Does anyone know how I can get the consumption to be from...

Hello, I’m running 4x 48VDC EG4s and 2x LV6548. I have one 5-ton Trane XR17 AC that is two stage. Most of the time the AC runs in Stage 1 which the system starts fine, but still dims the lights for a sec. When in stage 2 it drags the system a lot harder…Enter the soft starter. I’ve been...