Search results

This may sound like a silly question but what if I want to switch (on/off) a remotely installed water heater via wifi instead of wiring the Cerbo GX analogue output normally used for relays? Is there a built-in function or do I have to convert the analog signal to digital?🤔 I'm sure I'm not the...

I am getting a surprising number of L1 overload warnings from my two Victron Multiplus 5000 in parallel system with 20k battery storage. here is an example from yesterday's log: 76 VE.Bus System [276] Overload L1: Warning 2024-04-28 15:01:00 20s The usage at the time was nowhere near any...

A novel problem for me, today my seplos 200 based 48v 304A battery after reaching 100% SOC entered the single cell over voltage protection followed soon after by the single cell under voltage protection and the remaining capacity protection as from my image The display jumped fro 100% SOC to...

A few days ago I started my newly built 304A Battery managed by the Seplos 200 16s BMS and was trying to obtain a full charge and full discharge so that the BMS could asses the full capacity correctly and stopped the process when it read 10% but not knowing if that was the real value. 1) Do I...

Can anyone explain the meaning of the extensions 14s, 15s, and 16s in the Seplos 48v 200A please ? Does the S stands for sensors perhaps ? Cheers

I have a question for you guys and gals: I’m building a ground mount 15 modules PV System with a dedicated detached solar shed for all my Victron goodies. I have prepared both a combiner box with the three lines each with its own twin fuse, twin surge protector/breakers/reverse diodes plus a...

I am building my first PV system and I have a question in my mind. I have noticed that most Combiner Boxes have the reverse protection diodes positioned after the individual fuses before the isolator and merging point (Bus Bar) however since I will have a smaller consumer box next to the...

I have two brand new 48V 100Ah LiFePo4 rack mount Battery with Built-in BMS 51.2 V 5.12 Kw but different brand and I would like to use them in parallel after having been fully charged separately. Would it be better to add a BMS in between to control the charge or would the internal ones do the...