Search results

I did all these but in vain, shows it's receiving power because I received some sparks when connecting to the battery.

Same problem, the inverter has been in storage and fully disconnected for 3 weeks now as I ordered a cheap Chinese cnswipower as a substitute. The Chinese xijia came in yesterday and I installed it today. Powering more stuff that I couldn't power on with the phoenix. So I decided to reconnect...

This thing was working well powering my screen and soundbar then allover a sudden it goes off. When I checked the led lights, they were both solid on and when I checked the definition on the victron toolkit app, it means inverter is on but overload mode. Has anyone had the same problem and how...

Then this is for 800va - 1200va Mine is 24/500

I did all these, but no change. Let me attach the Led meaning as got from victron toolkit app. The lights just remain solid on but no AC out

To add more information, I was changing the location of the inverter from my sitting room due to fan noise at night. After installation I started the inverter to test it. The screen powered in well. Now to finish up everything I had to lengthen my DIY ve.direct cable which was short. I was...

My inverter suddenly stopped providing AC power while I was watching the screen. On checking both the red and green LEDs were solid on. When tried switching it off and on, disconnected all connections both DC and AC for a few minutes etc on turning it on both lights still remained solid on with...

those wires are very tiny, usually they dont grip firm when you only crimp. i usually make the copper strands protrude a little and then solder after crimping to give me a tight connection

i gues you have a bms + fuse on each bank which should keep you calm. for as long as your cells are healthy, and bms balancing them well, the two banks connected in parallel will always have matching SOC

point F is the best location if he is only connecting one inverter to the bus. otherwise if you plan to connect other components such as CC, inverters etc then the shunt should come just before your distribution busbar

this happened to me some time back, where one of the victron mppt controller would stop charging at around midday yet the friend is actively pumping amps. first i thought it was overheating/ derating but i checked the temperature which below 30deg c. so i climbed my roof to check the array only...

I imagine if you managed to buy those two giant LIfePo4 batteries then I guess you can just add a few more panels, even for the long life span of the batteries its worth keeping them above 50% charged. Even for worst days with no sunshine your TV and lights will remain on for a few mores days...

In summary you do not have enough PV array to fully charge your batteries. I have 4 160W panels connected in 2series per victron 75/15 mppt CC to charge my DIY 24V 160AH battery as shown in the attachments. Despite the panels being rated at 160wp, I literally get slightly above 100w max on a...

I want to share my experience purchasing Lifepo4 cells from Docan, well I have read both good and bad experiences from diyers here. For me I feel I got good cells from them. 8 cells 160AH each, made a 24v pack and been charging for 4 days now because I have only 4 panels with a total of 640Wp...

Hello members, I am considering fabricating a crimping die using allen screw bolt head and slice it into two to have the hexagon shape, has anyone tried this successfully?