Hey All,
I bought these puck lights: https://www.amazon.com/gp/product/B012ZOI3ZW/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&th=1
They're 12v puck lights, and I have a 24v battery, so I wired them in 2S 2P, thinking that should convert the 12v lights into 24v. They're all wired up, installed in my ceiling, and a test run showed they work fine with a dimmer switch I installed, though it was a quick test. I just want to do a sanity/safety check, and make sure this is an appropriate way to have these lights wired.
Are there any concerns with the way I've done this?
Thanks,
I bought these puck lights: https://www.amazon.com/gp/product/B012ZOI3ZW/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&th=1
They're 12v puck lights, and I have a 24v battery, so I wired them in 2S 2P, thinking that should convert the 12v lights into 24v. They're all wired up, installed in my ceiling, and a test run showed they work fine with a dimmer switch I installed, though it was a quick test. I just want to do a sanity/safety check, and make sure this is an appropriate way to have these lights wired.
Are there any concerns with the way I've done this?
Thanks,