diy solar

diy solar

24v, 400ah Batrium BMS solution with 32, 3.2v CALB 100ah cells

TedH

New Member
Joined
Jun 5, 2020
Messages
186
First off, my entire solution is based on 24v battery packs and a 24v, 6000watt Aims inverter/charger. If the inverter/charger were 48v, I'd go with two 48v packs of 16 cells each. As it is, I am considering four, 24v packs. I just heard about the Batrium products. They are not cheap and appear to be more for grid tie or home systems. I've not seen a lot of info on Batrium RV systems. I note that there are on-cell monitors so I would need as many as 32 (one per cell) and then tie them into either one or multiple 'WatchMon'.

Any experience with Batrium in an RV setup?
 
Back
Top