mike450136
New Member
i am using 4 charge controllers and 4 solar panels. what connection method should i go with to connect the output of the charge controllers to the battery? i was hoping to avoid the lynx distributor. but i dont know if fuses are completely needed for this section of wire. they are certainly not required going from the solar panel to mppt for my specific setup.
second question:
other than the breakers being made in china, do you think they look fine for this setup?
breakers are for solar disconnect. not for tripping purposes:
third question :
would a Victron cebro gx be beneficial to get the 4 Victron mppts to play nice?
products that will be used:
solar panel 355 watt
four victron 75 | 15 mppt controllers:
battery
pv wire
second question:
other than the breakers being made in china, do you think they look fine for this setup?
breakers are for solar disconnect. not for tripping purposes:
third question :
would a Victron cebro gx be beneficial to get the 4 Victron mppts to play nice?
products that will be used:
solar panel 355 watt
four victron 75 | 15 mppt controllers:
battery
New LEV60F 3.2v 74ah Lifepo4 Power Cells
If you buy 6 they will ship in the original case. Otherwise we will repackage them safely into a custom box. They are Lithium Energy Japan cells model LEV60F. Nominal voltage is 3.2v. They are 74ah cells. These cells are overstock and were originally intended for luxury vehicle 12v lifepo4...
batteryhookup.com
pv wire