Hi everyone,
I'm new to the forum and need some help with my Anern AN-SCI-EVO-2000 inverter (1600W/12V). I have it connected to utility power and a 12V 150AH LiFePO4 battery. I’ve set the bulk charging voltage to 14.2V and the float voltage to 13.5V. However, the inverter indicates that the battery is fully charged when my multimeter shows 13.38V on the battery terminals with no load.
I'm wondering if I've misunderstood how LiFePO4 batteries are supposed to charge or if there's an issue with my inverter. Can someone please explain what's happening and suggest what I should do to fix it?
I'm new to the forum and need some help with my Anern AN-SCI-EVO-2000 inverter (1600W/12V). I have it connected to utility power and a 12V 150AH LiFePO4 battery. I’ve set the bulk charging voltage to 14.2V and the float voltage to 13.5V. However, the inverter indicates that the battery is fully charged when my multimeter shows 13.38V on the battery terminals with no load.
I'm wondering if I've misunderstood how LiFePO4 batteries are supposed to charge or if there's an issue with my inverter. Can someone please explain what's happening and suggest what I should do to fix it?
