Weldman
Sunlight Welder
Went into -40° temperatures sending the VOC way past the 600VDC threshold on the charge controller which sent it into rest mode. Remedy the problem by taking two panels offline and restarted the unit which I also restarted the inverter. Now I got solar coming in and inverter is down, will not be seen by the charge controller. I like to think it's cause temperatures are too low for the unit to come on since they are in a unheated garage. Only way I got lights on with internet is pair of jumper cables and a old Aims inverter hooked up. Power is going to the unit since there is a blinking yellow/amber light on.