Stiffmeister
New Member
- Joined
- Nov 4, 2019
- Messages
- 100
Is .250 x 1" tinned copper acceptable for making bus bars? There is an option of .1875 x 1" but copper only. I'm pulling the cells out of of my SHUNBIN 12v batteries and making a 48v setup with Overkill Solar 16s BMS. Considering that this setup is 100 amps max drawing from battery bank, is 2/0 battery cables an acceptable size? My original solar setup came with 4/0 cables for the main +/- to inverter (I now have two Outback Inverters). Charging these four batteries in series with the original BMS, it was feeding over 2000 watts and the positive connector would get warm.