I am in the planning stage to build a victron off grid system. I have 6x 7kwh 48v 150Ah Lifepo battery banks which i want to connect it parallel.
I want to install a protection onto each battery before wireing them in parallel onto a busbar.
I an wondering what is acceptable, a megafuse or a resettable DC MCB breaker? I only need 63A types as the current should never rise above this per battery when used with a Multiplus 48/10000 140
I would prefer to use 2pole 63A DC MCB's 1 per battery, so is this possible, as I have only ever seen wire type fuses used such as mega fuses.
I want to install a protection onto each battery before wireing them in parallel onto a busbar.
I an wondering what is acceptable, a megafuse or a resettable DC MCB breaker? I only need 63A types as the current should never rise above this per battery when used with a Multiplus 48/10000 140
I would prefer to use 2pole 63A DC MCB's 1 per battery, so is this possible, as I have only ever seen wire type fuses used such as mega fuses.