Deyedreamer
New Member
Hi, anyone know what settings need to be changed / adjusted on the DEYE String Inverters when AC Coupling via the GEN Port.
The manual isn't very good at explaining things.
My main concern is the "RUNNING PARAMETERS" in the user manual page 35 (3.6kw SUN-3.6-G04-AU).
My problem so far is the Hybrid is switching load on and off when battery is cycling from 99% and 100%.
The string inverter is programed to come on at 95% and switch off at 100%.
There is limited information out there in regards to this configuration.
Any advice greatly appreciated.
Thanks.
The manual isn't very good at explaining things.
My main concern is the "RUNNING PARAMETERS" in the user manual page 35 (3.6kw SUN-3.6-G04-AU).
My problem so far is the Hybrid is switching load on and off when battery is cycling from 99% and 100%.
The string inverter is programed to come on at 95% and switch off at 100%.
There is limited information out there in regards to this configuration.
Any advice greatly appreciated.
Thanks.