Flexible solar panel stand.

[Rorymax10]

I'm looking for ideas to construct a lightweight stand for a 180w flexible solar panel, can anyone point me to some solutions?

I will be regularly re-positioning it to follow the sun when off grid touring.

Thanks.

 

[MrNatural22]

I used pvc pipe. Lightweight and cheap.
Used screws and flat washers thru the grommet holes to secure to the pipe.
Folds flat for storage.
I put sand bags on the rear kicker to keep the wind from blowing it over.
Didn’t use any glue because the fittings were pretty snug. ?

 

[Rorymax10]

I used pvc pipe. Lightweight and cheap.
Used screws and flat washers thru the grommet holes to secure to the pipe.
Folds flat for storage.
I put sand bags on the rear kicker to keep the wind from blowing it over.
Didn’t use any glue because the fittings were pretty snug. ?


View attachment 172711View attachment 172712View attachment 172713

Hey! that is very neat, thank you ?

 

[MrNatural22]

Your welcome it’s cheap and easy

 

[DrewLoker]

Neat PVC solution!!! I am going to make one for a couple of panels I am toting around!! Thanks!

But I am going to make one change.

The legs that kick back...going to make it 3 sections with a union so the angle can be adjusted from EARLY morning to mid day.