waterflea
New Member
- Joined
- Oct 9, 2022
- Messages
- 42
New system, just commissioned last week, tried to get the generator (Honda EU7000is) to charge the batteries through the inverters. (2 XW Pro's) Amperage levels
climbed to 60-70A on the inverter display and inverters shut down. Talked to Schneider TS and they said voltage was too high coming out of the generator (252V).
Can the generator voltage be controlled or something in the system be changed to make this work. I know other people are using this generator.
climbed to 60-70A on the inverter display and inverters shut down. Talked to Schneider TS and they said voltage was too high coming out of the generator (252V).
Can the generator voltage be controlled or something in the system be changed to make this work. I know other people are using this generator.