Thanks in advance on your thoughts and experience, I am going to use ironridge solar racking and the L-foot.
But am after recommendation on the base that fastens to and through the metal roofing, standard ribbed metal (exposed fastner). In my case it will go through a metal roof into a 2x6 on edge framing.
I am trying to decide between, the SnapNrack Metal Roof Base, 242-02036, https://www.greentechrenewables.com/product/snapnrack-metal-roof-base-242-02036
or
these EJOT JA3-SB-8.0x80/50 FZD Stainless Steel Fastener for Wood Substructures fastners, https://ressupply.com/racking-and-m...ainless-steel-fastener-for-wood-substructures
I see a number of fastners that mount to the metal rib, but not a fan of that many screws and my metal rib does not seem that big and thick to be adequate.
But am after recommendation on the base that fastens to and through the metal roofing, standard ribbed metal (exposed fastner). In my case it will go through a metal roof into a 2x6 on edge framing.
I am trying to decide between, the SnapNrack Metal Roof Base, 242-02036, https://www.greentechrenewables.com/product/snapnrack-metal-roof-base-242-02036
or
these EJOT JA3-SB-8.0x80/50 FZD Stainless Steel Fastener for Wood Substructures fastners, https://ressupply.com/racking-and-m...ainless-steel-fastener-for-wood-substructures
I see a number of fastners that mount to the metal rib, but not a fan of that many screws and my metal rib does not seem that big and thick to be adequate.