0truck0

RV world is full of garbage. Blows my mind that on a $2,000,000 RV that they use these same garbage AC units and the same garbage noisy...

It is a FACT that it is possible and has happened sometimes, but most of the time, no, no issues will occur. The danger is to the...

l think "illegal" is a bit of a stretch for a bicycle.

Agree with the above. The controller runs off of battery power and should not turn off if solar is not present. Solar is not present...

Can you just skip the pedal assist and replace with a throttle? I think your project is too specific for a solar forum, and the ebike...

One option is to take the existing battery to a Battery Store/ repair shop and have them put in all new 18650 batteries. This is a...

I think part of the answer is to swap out the alternating current compressor for a DC compressor so you can run the compressor straight...

Yep, exactly. Most use a switch like this: With this one you can charge either or both or neither. The solenoid or relay option with...

The deployable panels were added and the existing ones left alone - as this way I did not have to un-do any existing panel wiring in a...

Go with the one @corn18 recommends, but use the 16 amp one amazon.com , whether you go with 4S1P, or 2S2P. Remember, series adds voltage...

https://diysolarforum.com/threads/double-stack-solar-deployable-wires.79970/ You can always expand your square footage when parked...

I edited previous post: run the solar neg to the bus bar. Run the pos to the switch. Run the switch to either the controller or bluetti...

Looks right**edit... Yes, for yours, run the solar neg to the bus bar. Run the pos to the switch. Run the switch to either the...

If you only want a switch, then you just need it to not trip falsely. If panel maxes out at 15 amps, then do not put in a 14 amp...

Get a second charge controller if you need to, expensive, but ultimately a cheap price to pay to make sure your panels work. Just a...

Instead of lever nuts I would go lugs, copper lugs. Do not solder them, use a crimper or a hammer and a flat head screw driver. Put...

Dreaming.... They are right, this is a fools errand. Stick with the inverter, they are efficient enough for what you are doing, and I...

I had a class C with the front half of box, about 7x7 foot area with bed over cab, and the 13.5 AC unit was still over-kill in a 120...

There is the diode in that little box too, or something. You will have to buy one and make modifications yourself if you want it...

If they say to use a fuse also then why not... Up to you. I only use the breakers. Fuses date back to when electricity was first used...