diy solar

diy solar

Most reacted posts

  • Post in thread: AiLi Battery Monitor

    To follow up on this. I set mine to my battery size (tested) and from 100% (set when full) to 0%, it was dead on. I got about .01% more power before the low voltage disconnect. My concern about having the larger size shunt was unwarranted.
  • Post in thread: Coffee Maker

    No sarcasm here. I'm right there with you. I have been spending time this year rebuilding a 24x24 hunting cabin on a small piece of land our group purchased. Our previous one was torn down some years back and was 12x24 for 6 guys, no water, no power, just gas lights and a gas stove, hand pump...
  • Post in thread: Really bad battery vendor experience. Where to post?

    You received a confirmation text and replied to it with your cancelations? I would assume that was an automated text and responding goes to no one. I've done business with them before and it went fine though I don't recall how long processing and shipping was. Here's hoping you get the...
  • Post in thread: Ryobi Zero-Turn Mower SLA to LiFePo4 Conversion - (Updated - Build Complete With Pics!)

    Good day. It appears those batteries you linked to will be able to replace the agm's in your mower. I would expect you can also use your charger without issue. Thoughts; You do not have to match the amp hours, only the voltage. The size difference between the agm's and lifepo4 might make it so...
  • Post in thread: Ryobi Zero-Turn Mower SLA to LiFePo4 Conversion - (Updated - Build Complete With Pics!)

    That's true and I am in the same line waiting. He did however mention purchasing quite a few 150ah's that were ready for immediate shipping if I remember correctly. That's probably the direction I would look first before buying through Ali. Like I said before, if the output works, 16 could fit...
  • Post in thread: AiLi Battery Monitor

    I was under the impression if they are closer to actual usage then they are more accurate, or rather the larger ones have a harder time monitoring small loads. I would say more often then not I use less than 30 amps but could possibly pull up to 185 with my inverter size. If thats not the case...
  • Post in thread: Coffee Maker

    The mainstays brand 5 cup at Walmart uses 600 watts for 7-8 minutes and the base heater uses less than 30 watts. I fill it to the over flow holes in the back and it's closer to 6 cups (6oz cups). I also have the Black and Decker 5 cup version but it has no heater so by the time I want my second...
  • Post in thread: Coffee Maker

    OP only mentioned watts so I expect he is limited by his inverter.
  • Post in thread: Our NEW GO-TO LiFePO4 vendor...09.20.21

    I meant to be adding to this thread but have been busy with other things. Anyway, I ordered 16x 280's from Jenny out of China on May 26th and received them July 6th and 7th. They all look really nice (no bulging, dings, or dents) and are the same voltage (3.33). I wish I had asked to buy some...
  • Post in thread: Ryobi Zero-Turn Mower SLA to LiFePo4 Conversion - (Updated - Build Complete With Pics!)

    That 280 peak is only for 5 seconds so if you pull over 100 amps going up a hill, you might not make it all the way to the top. That said, I believe you took some readings and came to the conclusion you wouldn't be pulling over 100 anyway even up hill. Worst case scenario is you do not mow on...
  • Post in thread: Decided To Go For It - Career Change Imminent!! ?

    Congratulations! Best of luck on your en devour.
  • Post in thread: HQST Compact 100W - Sent Renogy panel of incorrect dimensions

    I have one of those same panels. It's a good panel. I use it for my battery box (solar generator). They are a little heavy at 16.5 lbs which is why I want the compact panels at 10 lbs. Hoping this works out for you Bri2k and you get your compact panels. If you do, please let me know who your...
  • Post in thread: Low power LP furnace ?

    You are saying a lp furnace that "uses the least power". I'm assuming you mean electric power? Have you looked for one that operates with a thermocouple? After the pilot is lit, the heat creates the electric power needed to turn the gas on and off and is self regulating using a thermostat on the...
  • Post in thread: Coffee Maker

    150 watt hours for 72oz. of coffee. You'll get that back in an hour of sunlight on your 200 watts of panels, and you get to feel like a king in the woods having your electric coffee pot while camping. Enjoy friend!
  • Post in thread: Does the MPPT power the load in "The Minimalist Solar Package diagram"?

    In the included picture, the load out of the charge controller (two screws furthest right) is not connected to anything. I'm not sure if I follow your question. If you are asking if power coming in is redirected to the load out (assuming there was one) then yes it powers that and the excess goes...
  • Post in thread: HQST Compact 100W - Sent Renogy panel of incorrect dimensions

    Yeah I will. From reading your post I thought you had the opposite issue I did and it gave me hope they had the correct panels and simply sent me the wrong ones. In reality, they are just sending what they got.
  • Post in thread: Poka-yoke

    I have a background in manufacturing engineering and I am very familiar with the term and trying to make things idiot proof.
  • Post in thread: Stud Removal

    I have those same cells, and yeah they could have made the studs 1/4" longer. I believe they are laser welded from talking with a vendor in China about getting more.
  • Post in thread: Small Barn Solar System

    Per day by the numbers. 2x fans- 200x24hours=4800 watts 2x bulbs- 200x18hours=3600 watts 8x bulbs- 800x.5hours=400 watts 24 hours of consumption= 8800 watts (which I would call 10,000 watts minimum with system losses) You need to generate that in 2.5 hours of sun so 10,000/2.5= 4000 watts of...
  • Post in thread: Ryobi Zero-Turn Mower SLA to LiFePo4 Conversion - (Updated - Build Complete With Pics!)

    First you are going to want to know the size of the cells you choose, then determine how many you will group together, then find/make a box that size. For instance, here is an image of 16x 135ah cells in an 8x2 configuration. This layout measures 13.5" wide and 15.125" long, and 7.25 high (plus...
  • Post in thread: Our NEW GO-TO LiFePO4 vendor...09.20.21

    Looks like the Docan site is down, or gone rather? All I am getting is 502 error. I swear I just looked at batteries there a couple days ago. Anyone else having this error? https://www.docanpower.com/
  • Post in thread: Why does Inverter shut off after running my air conditioner for a few minutes?

    I had a similar problem running ac and microwave on my RV/Camper. It was due to the built in bms shutting the batteries off at 30 seconds of overdraw (according to the bms setting). Everything would run fine and then shut off. I thought it was the inverter because it would fault out (beep) from...
  • Post in thread: HQST Compact 100W - Sent Renogy panel of incorrect dimensions

    Yes, that is the same as the label on my panels. I have not actually weighed a panel but they are light and I believe the 10 pound claim. If they are saying the current batch is 12 lbs, I would believe that too. As often as the specs change, it seems like they just build these with whatever bulk...
  • Post in thread: Does the MPPT power the load in "The Minimalist Solar Package diagram"?

    Yes sorry, I was looking at the picture only and not your schematic. As was pointed out, removing the battery connection should shut off the MPPT.
  • Post in thread: Ryobi Zero-Turn Mower SLA to LiFePo4 Conversion - (Updated - Build Complete With Pics!)

    Another way to go about it is to look on alibaba for what you want and then contact supplier and request a quote for door to door pricing (DDP) to your location. The prices are regularly better than aliexpress. By the way, what are the dimensions of the battery compartment?
  • Post in thread: Coffee Maker

    https://www.amazon.com/Coleman-Stainless-Steel-Percolator-Cup/dp/B0009PUQSM
  • Post in thread: Minfridge on inverter

    12 volts at 20amps is 240 watts output which is why they do not look very robust. I think your idea could work, but a small inverter would use very little power and they have low voltage cutoffs built in. That digital thermostat will have some draw as well. I would say, try to find out what your...
  • Post in thread: Brendon Tait on LTO cells

    There are other metrics besides efficiency for choosing the right battery for an application. For instance, my upcoming project is to build a dedicated battery for our off grid cabin. We are currently running LFP and will need to remove the battery around new years before the real cold sets in...
  • Post in thread: Backyard Revolution?

    Any product with that many testimonails and no specs listed is garbage and a scam. It has to be, or else it wouldn't be set up like that.
Back
Top