Sorry, away from "technology" so just catching up. 😀
So regarding the parallel, mine is definitely the parallel version it’s an SRNE inverter - though that info took some prying out of the reseller Sunboost (although as @42OhmsPA and I had already noted in the manual they sent it even states on...
Yes I sorted this all out before ordering. They sent me all the details before I ordered. I made sure it was going to be the parallel version they were sending.
No, it’s the split phase 120/240 US spec one apparently.
Still waiting for a price on the 10k SEI model I posted earlier with AC and gen inputs - plus it’s ip65 apparently. The rest of the specs on it look to be similar or the same to those of the 10k ASP to my (untrained) eye?
Yeah I thought so. I was also curious about the 3 units in parallel - I knew I had read SRNE in the manual somewhere. I actually ordered one of these, according to the UPS tracking it literally at the depot up the road as I speak. It was $1200USD delivered if I recall.
I was going to run the inverters to 60Amp 2pole breakers in a spare load centre panel I have, then take a 1awg wire from that to a 100A panel main breaker where I have all my house loads. That sits next to the older commander 200amp service entrance. I was going to have a 100amp breaker from the...
I was given a price today for the 12k SEI split phase I posted earlier of $2038 and the 10k $1955. No shipping cost as yet because the inverter is considerably heavier than the 10k that just arrived. It’s apparently upward of just over 42kg (for our lovely Americans that’s like 42 litres of...
Sorry @Dave911 missed this. Actually, no she went with the original price she quoted I think. They do like to add, or at least make a bit on their shipping quotes. I have ordered other things from China in the past that I arranged shipping myself via an agent in Toronto (I’m in Canada) they have...
Fell off this thread. Stopped getting notifications. Anyway, the parallel version I got had exactly the same label on the side with the UL confirmation bit
So using the watts / volts math 2 inverters would be 83.3A x 150% = 125A. So running each inverter into 60a breakers in a dedicated panel (call it the feeder panel) then running 1 awg wire from feeder panel to loads panel via its 100a breaker would be OK I assume.
Thanks for those links I will take a look.
I just have the one for now as I ordered this for someone else in truth and wanted to test it to see that it worked. I then found @42OhmsPA posts about his inverter and figured this was so similar as to be the same but with parallel. I am thinking of...
They make this in a split leg 120 + 120 also. I assumed the manuals would be pretty much the same for both single phase 240 (EU) and the 120/240 (North American) models.
My quote was for the NA 120v model.
Just looking at their website - the spi 10k parallel is what I have now. The 12k IP65 is the SEI I have had a quote on from the supplier of my 10k @$2300 delivered. SEI had the added features we discussed earlier - ct’s, dedicated gen port, outdoor rated (I think this is there LuxPower 12k...
I asked further about he SEI 12k unit I posted the manual to earlier. I have been told is a hybrid inverter capable of both grid and generator input - not either or and is also IP65 rated..
@Dave911 it was shipped via Montreal then trucked to my local CBSA holding warehouse in NB. I collected it from there. That was 5 years ago. It’s been abused but still working…..😁
😄😄🤦🏻 I'm guessing they just go with what they think most people use as common parlance for said ports/connectors..... Suprised it doesn't say starlink..🧐
This is the seller I used. Good coms item arrived quickly after payment. https://x.alibaba.com/AwJjBH?ck=pdp Hope that link works? It opens the alibaba app.