Carlos_Sol-Ark

I've heard of a guy that's pretty helpful on this forum, but I don't think I'm allowed to mention him.

Thanks to everyone who helped! I did a test by turning off the service disconnect at night. The lights had the barest flicker, but...

That's very helpful. Thank you.

Hello everyone, I’m setting up a solar system and thinking about getting a Sol-Ark 15K inverter, but I don't have any batteries. I...

If you are just planning on having PV panels and selling to the utility you only need to use the GRID terminals to do so. The LOAD...

SolArk can sell you another set as Robby suggested. The specs are in the manual and you can purchase them online. If I recall they are a...

I was frustrated that Gen Peak Shaving is no longer supported, but then realized what I was planning to do probably isn't practical...

Yeah Haha I'm here, I just get off at 6 pm Central time. Also monitoring the forums is more like a third priority to my other duties so...

Except that, in general, that is how they work. It shift its own production to synchronize with the grid (or generator), and then...

Whenever you dont see the SOC or Voltage options in the Time of Use menu it is usually an indicator that you are in Closed Loop...

If there is no PV or battery power, the Sol-Ark will power off and just pass the grid through to save you the power it draws for itself...

I'm going to dig up some more information on my end so can get a decent response for all the points you brought up, but I will say I...

Not sure what you mean by Eco mode in this instance so let me know if Im not understanding. Grid following to grid forming happens all...

We do for certain have a default 4ms transfer time. The adjustment was added because some users wanted to be able to tell if there was a...

The sol-ark tech was trying his best to figure out why the inverter was misbehaving. I did mention that it was a old/new unit and the...

Answer to which question? If the AC PV is coming into the Gen Port, keep it there. That is the best place for it. You can go directly...

Thats right. The Shutdown V or % indicates the battery level in which the inverter will completely shut down. The Low Battery level will...

Yeah, thats part of the hardware differences between the GRID and the GEN terminals I mentioned above. These hardware differences mean...

I'm guessing with Split Phase, it doesn't matter which line goes to which connection. The inverter can synch. With 3 phase, I'm...

The generator terminals on the Sol-Ark cannot differentiate between 120/240 split-phase and 120/208 3-phase connections. Our grid...