hardtop

Its all wired up. All it needs is a handle. Another accessory that fits 12V sockets is my air compressor.

I'm looking to wire up and mount the 12v socket adapters. It has 4 AWG leads that will connect to the pos. and neg. junctions. The power...

I wanted to share my case revisions since the beginning of the year. I followed a lot of advice here except the material that goes in...

Why did that other box catch on fire?

I use a Wilson amplifier and a Yagi 14dbi way up high. Its a PITA to find a tower sometimes while overlanding. I have a lot of...

nice rims, bro

I'd like to see your setup when your done. How many ah cells did you get?

Its a V1 DIY pack and I'm on the 3rd BMS I've had for it. I did have proper connectors/terminators, but they went back with the wire...

Where are your ring lugs for the balance leads? You had this working then lost one of the two leads under cell 4 that provided power...

I think op was in a hurry just to see the thing work😉and hopefully go back and do it right after proving out. The one thing to remember...

what app is that from?

Yes, I am lucky. I cheated death and I'm grateful to be here to talk about it.

I had a really bad experience with 18650. 1 cell was less then the stated AH. I emailed, and emailed and emailed. After a month I get a...

That was the problem! Thank you!!

You only have a single wire to cell 4+? I believe there should be little red wire B4 AND little red wire B+.

Be careful that unused balance leads do NOT touch anything!

With B- (double BMS terminal) connected to the battery’s most negative ( same as the little black wire) and all appropriate balance...

I am not familiar with this "specific" model but: 1) If cells (any) are below 2.50, the BMS will not start up as it is below LVD. 2)...