Just an update on this. My 4.8 have been adjusted in January. They were all in series so any shading was causing major issues. I’ve now split them into 3 series strings in parallel. I’ve also replaced china inverter for 2 victron smart mppts and victron multiplus 2 5k inverter. Also added...
Not sure but its working, Im getting no grid alarm on cerbo now which is annoying. Ive seen some people have a -10w load from grid at all times. Not sure how to set this
Sorry I was playing about, but the settings u see above are what are now set.
Below is VS settings which i have not changed. The DC shutdown ones are what I would like to set if the battery gets to 46.5V it will switch to AC and then switch back to Inverter mode when at 51V
Also, if I overload...
Hi, A bit confused why my inverter won't auto switch when battery is low back to AC!
It's all updated, and I've checked settings using VRM download and upload.
Running 10kwh battery at 48v.
Switch on inverter set to 1 and in VRM it's set to ON (stays on AC input)
Any ideas pls
Thanks for all the replies guys. I’ve ordered a multi plus 2 5000 and collecting it Monday. I already have a victron shunt and 2 mppt chargers so makes sense to have everything victron
I have a 10mm earth from the house fuse box connected to AC in, on inverter then a 16mm live and 16mm neutral connected to AC in from house fuse box via 50amp breaker
Hi
I'll keep this basic but can add more to the post if needed. I've got a powmr 6kw inverter and It's powering my garage electrics. I've connected all the earth wires, and it has a 240v feed from the house fuse box. When the battery has power, it will invert the DC and power all my lights and...