yea i plan to upgrade both wires to 35mm2.
my eve cells have two terminals so that works very well battery side.
then on the output combine the 2 35mm2 cables into 1 70mm2
i suppose my question is replacing the x2 7awg cables rated at 200c or 105c knowing china. to x2 35mm2 cable rated at 70c...
use them everywhere if in doubt. right of the main positive battery terminal use a mrbf fuse or t-class which is better but more exspensive. this is the catastrophic fuse (if shit hits the fan fuse, it protects everything) these are essential.
hypothetically yes they are however not burning...
Hey,
Thanks for the reply.
yea i should really add up all my loads.
i was just hoping if any of you wizards out there would of been able to say heres the biggest inverter your battery can support or iv had a similar battery i used this inverter.
my plan is to use it in the workshop and see what...
Hoping someone's already done the hard work :)
ive just received 8 304ah cells and a jk BMS (200a cont 350 peak)
what 24v inverter should i buy? 4.8kw is 200a is it as simple as that? does any one have recommendations?
is it time to buy sodium cells instead of lithium?
at a quick glance, cost wise sodium 220ah cells seem to be a little cheaper compared to lithium 280's. link i found below,
weight wise, while it would add up building big banks, especially with sodium cells having reduced capacity. its not a...
hi guys
please help, iv bought the parts in the pic and just wondering on a couple of questions.
1) is the mega fuse to high? i bought this first then ended up settling on a 200a BMS. should i get a smaller fuse?
2) i haven't bought a inverter yet and i wondering what one i should i purchase...
agreed but for the price point its good value. while 60 VOC is tiny its double what the device the poster was asking about.
OUPES 1200W Portable Power Station with 100W Solar Panel
Q5: How to choose the solar panel?
A: OUPES has wide compatibility with other brands of solar panels, as long as...
i was afraid you were going to say that. iv a victron mppt, shunt, distributor and was keen to stay in that ecosystem but financially it doesn't make sense to buy 2. will rated giandel in his videos, what do you think of this, thank you.
https://www.giandel.com/products/ps-4000qar-24v
Hi Guys
Im from northern ireland and looking for help/advice. its time to upgrade the battery. i want inexpensive and expandable.
currently im looking towards the 320ah eve cells from aliexpress. i plan to buy 4. then later go to 16.
is this the most cost effective way? what would you all...
i have the 200a cont 350a peak JK bms. while i never will hit these draws i only want to buy the cable once. the 2 7AWG wires it comes with wont be used so im going to buy 35mm2. my question is what temp's are these likely to see and is cable rated at a cont 60c or 70c sufficent or should i be...
the small 7awg are rated to 200c. swapping them because according to ampacity charts there dreadfully undersized and i need a slight extension to reach the lynx distributor
i disagree with astrobob wholeheartedly on everything :). DIY is cheaper, expandable/upgradeable and can be made to be as small as a whatever your buying. just buy the same or similar components and build a wooden case. wouldnt take much to add usbs or small inverter to this picture or whatever...