jjww's latest activity

This; https://diysolarforum.com/threads/growatt-to-mqtt-home-assistant-python-server-script.79047/

Alcohol isn't the answer. Alcohol is the question. The answer is "yes!"

That was what I was looking to find out @EG4_Jared . Thank you for weighing in.

The only UL/NEC inspected etc approved way is side by side with 12" between them. A good alternative is in front of each other...I would...

We have updated the QSG to reflect the 7" spacing. I am posting it below. Quick Start Guide

So you purposefully made the manual requirement harder than what was necessary just to appease some AHJs? That seems dumb. The manual...

If the manual says 12”, then anything less is a code violation.

Quick start guide is the full manual ATM, 12" is still required between the batteries. However, the indoor version is only 18" wide...

other side of terminal

These are my cables from EG4 for my powerpro batteries. thats a 2/0 cable

Gosh I sure hope so. Myself and the other 10,000 members of my IBEW local have been crimping lugs on #14 thru 600MCM THHN for 40 years...

Pure BS. Some EVs can already get to 80% charge in 20 minutes on high speed chargers. But, the truth is, most car drivers park...

power wall rated 11.5 kW AC of continuous power per unit

I miss my SA I am unable to use it now with my 18kpv due to the using the cellular dongle so really hoping for a future hard wire...

I find myself watching tv at the cabin where it used to be rustic living with campfires every night. Then the cell booster showed up...

I have 3x SI 5048US putting out 120/208Y, with master inverter taking in single phase 120V from grid. If grid is 125V, that passes...

if they are color coded then ground one of the unconnected conductors to the ground wire (you did run a ground wire?) then check other...

Where did you get the orange connector?

Did you ever get an answer to this question?

your an EGGO STFU!