Recent content by mvreddy48

Hi, I’m also exploring it but most of the solutions are heavy, noisy, bulky and does not produce enough to justify the cost. I’m looking for a 48V turbine, small, silent and with decent ROI.

You may want to consider this. They ship in around 7 days. Thread 'Experience sharing - Buying a 51.2v 14.33KWH Wall mount battery pack from Shenzhen Basen Tech (US stock)'...

You may want to consider this one for 48V 280ah - Thread 'Experience sharing - Buying a 51.2v 14.33KWH Wall mount battery pack from Shenzhen Basen Tech (US stock)'...

Just a thought - How about doing 6s2p configuration? You will be still within the inverter’s voltage range (max 385V, I believe).

What configuration are you planning to put the panels in? 4 runs seem overkill. What is the max voltage allowed by EG4 6000xp?

I don't think they will just give you the 20kwh battery for $2K without any strings. This seems like a home backup system via battery and without any Solar or a generator unless I'm reading it incorrectly.

Another solution could be to put diffent direction facing panels in parallel instead of series.

I see, this way I have been already using the weather app on the iPhone with the UV option from the drop down.

Attached the new wire and it is recognizing only one battery aka the Master battery at address 1 and the other battery at address 2 is not displayed in Solar assistant.

Very detailed explanation. Thank you for that. BTW - I was reviewing SolarAssistant website today and they are claiming that battery connection can happen via CAN (see attached).

Thank you, I ordered the right cable.

Just tried it but it remains in Connecting status. Can somebody please chime in?

Question - Can I connect the Orange PI with the battery via CAN port on the master battery?

Yes, up to 6 units can be put in parallel. https://sungoldpower.com/collections/hybrid-solar-inverter/products/8kw-off-grid-solar-inverter-ul1741

True from spec perspective :-( What could be another option to resolve this issue perhaps put a new similar AIO in parallel with the current one (this will increase the capacity by another 4KW per leg) or replace the existing one with 15K AIO?