I email EVE and got the latest specification sheet with is dated 12-22-2019 whats nice is it will tell you how to figure out date of manufacturing from serial number
overkill solar You doing a great job on customer service. I wish i found out about you before i ordered my BMS from aliexpress. I ordered a 120 amp CLRD model witch i believe is similar .Now that i been following the tread i wish i had waited and done more research. I realy like the fact...
The solar charge controller job to charge the batteries . It that simple I battery monitor would be helpful that way you know how much your drawing out of battery as opposed to what the SCC is putting in.
I have the same converter the wfco are know to very hard to get to kick into the bulk stage , with less of a voltage drop on the Lifepo4 I don't think it will ever kick in. I would just put in a battery switch and let the solar do most the work. when you have shore power shut battery off and...
When i talked to Amy she said she could not say that the cells where new grade A cell. I ended up buying the same cells from Shenzhen Basen technology on alibaba . shipping was 1/2 the price. Of coarse i cant say anything until i have them in my hand. I even emailed Amy and she could not match...
Yes that was a problem before the honda get me to 80% quick but the last 20% would take way longer than i was willing to wait. I had ordered my new trailer before I decided on The DIY battery. I ordered 2 190 watt panels on the roof , my trailer build will be done late July. with those panles...
Thanks for the link.
My neighbor had some 3/8" copper . I made it out of that. problem I had is the 3/8" was so thick the battery post nut would not attach. I had to step it down for that.
How can I keep it from corroding? I know it really should be tinned . I not really set up...
I just went over my document comparing to the one you posted and it word for word except 2 things. the mention of fixture and the graph showing that info. The other item mine list the discharge current at 1c and your is .5c
I planned on doing this DIY project for my RV. My plans have changed. I have most everything you would need for a 4S 12 volt battery. Al this stuff is new untouched.
4 280AH EVE grade A cells Purchased on Alibaba
all cells read 3.3Volts...
I no expert and I know nothing about that controller . but i can only think of 3 things to check, my guess is the controller died.
1. first check pv output
2. If you got good output from panels and its not coming out of controller you know its the controller
3. check battery Not sure what...
The quality of the build is what concerns me. This is litime first pouch cell battery build. I have been emailing several times for look inside. I asked them to send me pictures or sent a Battery to one of the youtubers to tear down.. their response is.
"Hi Michael,
Sorry, I was told that the...
On BMS the biggest problem we have is finding them with large wires. Put on twice as many large wires as needed!! make sure it has a low temp disconnect. many of us build they for rv . they can be exposed to below freezing temps.
here you go 10.00bucks
https://www.amazon.com/dp/B0854LBYZ8/ref=twister_B084ZX3FNM?_encoding=UTF8&th=1
by the way if you bought from overkill solar in the first place you would have it . I mad the same mistake
well there is some risk ordering like this, but I rolled the dice . I will see what happens. I read the whole xuba threads . then decide if its right for you .