realpinochet

The usd/yuan pair is relatively high considering the last 10 years fluctuations. All markets are expecting Powell to start lowering...

You're right, still would like to see it since they had videos of it getting curb stomped and it did fairly well.

Exactly, I want to see it go toe to toe with a xp pro, radian, rosie etc on surge and continuous output.

I'd like to hear why solark put 200A in their 15K. I believe they say it's to do exactly what we're talking about..to go between the...

Fwiw, that appears to be a fixed window, if that matters to code enforcement.

It's a fixed window for the bathroom.

High voltage inverters.

What diagram tool did you use to produce this and where did you get the templates?

To the right of the meter is a box with a rubber cover ..I pulled it back and it looks like a breaker. I assume this is the 200A main...

Yes Sandi came across that in one of their write ups.

I wonder if this is my best approach. I just moved into a new house, it already has a whole house generator and transfer switch...

No . I think Robin mentioned it's not Deye or SNRE or any kind f the others Did a bit of digging think this is it: Fenghua Hualong...

I believe they also make high voltage commercial inverters like the sandi inverters. Can't wait to the DIY has HV inverters as the norm...

From what Robin mentioned the factory building the One for them doesn't build for any other companies.

I had to cut out a significant portion of my 200 amp whole house write up due to the length allowed here. I would ask you to go on the...

200 amp vs. 100 amp Inverter pass through For 30+ years customers have requested whole house backup. This goes all the way back to my...

If one was to suspect SRNE or Perhaps Deye would one be correct? Asking for a friend! Do we have any testing info and videos of this...

That's nice, I wonder if they'd share a scope of the results. I'm particularly interested in the HF bands along with 2m and 6m...

If inverter between meter and generator, then you need 3 lines: meter to grid input, generator to gen input, and panel to load output...

I'm fully off-grid so no utility power. Generator runs a battery charger and inverters are in the container.