I have a Renogy 100 watt solar panel connected to a Wanderer solar charge controller connected to two Trojan T-105 (Flooded) batteries connected in series (+ to -) with a generic 750 watt invertor which has positive connected to one battery, and negative connected to the opposite.
When I GFCI test it reads that my hot / neutral is reversed. But I don't understand how that's possible.
This is my first solar build. I'm, obviously, not an electrician, most of my experience is with small electronics, but I did successfully build my 50 amp electrical system in a Tiny House I built. Without electrocuting myself or so much as sparking something.
When I GFCI test it reads that my hot / neutral is reversed. But I don't understand how that's possible.
This is my first solar build. I'm, obviously, not an electrician, most of my experience is with small electronics, but I did successfully build my 50 amp electrical system in a Tiny House I built. Without electrocuting myself or so much as sparking something.