I want to connect two 5000 watt 48v Victron Multiplus inverters to a 43000 watt, 48v battery bank. The battery bank is about 9 feet away from where the inverters will be. I'm looking at increasing efficiency and minimising voltage drop.
My aim is to combine their output so that a total 10000 Watts would be usable at 230v.
What is the recommended way to wire these inverters to the battery bank?
What wire gauge would be appropriate for this setup?
Thanks in advance
My aim is to combine their output so that a total 10000 Watts would be usable at 230v.
What is the recommended way to wire these inverters to the battery bank?
What wire gauge would be appropriate for this setup?
Thanks in advance