photons2e-s
New Member
- Joined
- Oct 26, 2022
- Messages
- 15
Hello,
When not using battery communication.....does the 6000XP have a setting to power loads from the grid when the battery SOC gets below some %?
Then, back to battery once the SOC is above some %?
I assume so but do not see this in the manual.
As many of us know, using voltage to define the switch-over is not a good method.
Thanks.
When not using battery communication.....does the 6000XP have a setting to power loads from the grid when the battery SOC gets below some %?
Then, back to battery once the SOC is above some %?
I assume so but do not see this in the manual.
As many of us know, using voltage to define the switch-over is not a good method.
Thanks.