Hey y’all. Need some guidance with this Enphase off grid project. Single line diagram attached. Please advise If additional equipment needs to be attached or any changes should occur. Also photo of the main panel is attached ( builder placed a meter combo panel prior to knowing details of further off grid solar installation ). Main questions are:
1. How the interconnection (wiring) will be performed between main panel and controller?
2. IQ combiner 5’s communication breakers needs to be removed and placed a quad breaker into controller for an off grid application?
3. There will be also a 20kW Kohler generator which is not yet designated in this set of plans. Will it substantially change anything or It’s just an additional wiring that is going into a disconnect and then controller’s generator breaker.
Thank you in advance!
1. How the interconnection (wiring) will be performed between main panel and controller?
2. IQ combiner 5’s communication breakers needs to be removed and placed a quad breaker into controller for an off grid application?
3. There will be also a 20kW Kohler generator which is not yet designated in this set of plans. Will it substantially change anything or It’s just an additional wiring that is going into a disconnect and then controller’s generator breaker.
Thank you in advance!
