I need some help. I just installed a 12 volt battery bank with 10 Lifepo4 batteries from Elfhub. They all run to bus bars and then to (2) Aims 5000 watt modified sine inverters. I charge with a 100 amp Lithium rated charger from Powermax, set at 14.4vdc. The batteries charge up fine but when we apply any load above 1700 watts, the inverters will fault and turn off. I've done plenty of these systems with golf cart batteries and they work fine. I thought the Lifepo batteries would be better but I'm afraid that the BMS in those batteries is somehow not liking my setup. My thinking was that even with 100 ah BMS, 10 batteries running in parallel to bus bars should be able to produce that much power with no trouble. Any thoughts?