Lifepo4 Prismatics - diagnostics

[Newenough]

Ive been aquiring a lot of cells, 8 at a time (8s 24v). As I want to be sure I'm getting what I paid for, I purchased a CBA IV battery analyser. However, I would like to be able to charge/test individual cells on occasion. Does anyone use or know of a charger that can do individual 3.2v lifepo4 cells?

 

[Mars]

I use a bench power supply for charging batteries for testing. It works for charging pretty much anything.

Here is a link to the one I have.

30 Volt Adjustable Switch Mode DC Power Supply, 5 Amps

www.circuitspecialists.com

If I bought one today, I might consider a higher amp capacity unit.

Mars

 

[grizzzman]

Here is a 10 amp unit

 

[Newenough]

Here is a 10 amp unit

I need to charge individual 3.2v cells.

 

[grizzzman]

I need to charge individual 3.2v cells.

If you looked at the specs you would find that it is a 3.65 volt Lifepo4 charger(single cell)

 

[Newenough]

Good call. I did not look specifically for 3.2 1S when the items heading said 36v/48v/.... That was poorly written but good catch on your part. Ordered it, and thanks for the heads up.