New parameter in JKBMS ?

[JaÇum]

After a three-month-old JKBMS broke down, I ordered and received a new one.
I used the existing harness to fit the new one and it works fine but:
A new parameter has appeared and I have no idea what it is!
"Battery OVP(V) and Battery OVPR(V)".
I understand OVP and OVPR perfectly, but which "Battery" is it?
Thanks

 

[ArthurEld]

After a three-month-old JKBMS broke down, I ordered and received a new one.
I used the existing harness to fit the new one and it works fine but:
A new parameter has appeared and I have no idea what it is!
"Battery OVP(V) and Battery OVPR(V)".
I understand OVP and OVPR perfectly, but which "Battery" is it?
Thanks

You can see each cell voltage on the status page.

 

[dRdoS7]

Hi,

After a three-month-old JKBMS broke down, I ordered and received a new one.
I used the existing harness to fit the new one and it works fine but:
A new parameter has appeared and I have no idea what it is!
"Battery OVP(V) and Battery OVPR(V)".
I understand OVP and OVPR perfectly, but which "Battery" is it?
Thanks

Are you still using the same apk version? Mine is 14.15.3, and dosen't have those "Battery" readings. This looks like it measures the total battery, not individual cells, but question is why they are the same initial settings as the Cell OVP & OVPR.

dRdoS7

EDIT:

I just updated to 14.16.2, and no Battery protection voltage settings in that. Maybe as it's a new BMS, they have added that in latest FW?

 

[JaÇum]

Unfortunately, I seem to be the only one with this indication!
I couldn't find anything on the Internet.
There are hyper JKBMS specialists on this forum, but maybe I'm not in the right section?
I'll wait and see.
Thanks

 

[ArthurEld]

If you have multiple batteries, you can see them by clicking the 4 bars on the upper left of the screen.

Your pictures shows Cell OVP not battery OVP. Cell OVP has always been there.

 

[JaÇum]

Please click on the picture to sea them full screen !

 

[ArthurEld]

Please click on the picture to sea them full screen !

Sorry about that. I just checked mine and you are right. I don't see Battery OVP on mine. And the #s don't make sense for a battery.
Have you tried removing the app from your phone and installing the latest version?

 

[JaÇum]

I have 4.9.3 version.

 

[JaÇum]

I had asked JKBMS and they replied; Reload the app.

It was indeed a little bug from JKBMS.
When you reload the application, you can read:
SOC-0% Volt(V) 2.650
SOC-100% Volt(V) 3.500

It works.

Thank ArthurEld, & JKBMS.

 

[JaÇum]

Hello everyone
After 2 months of operation and 6 cycles, the percentage of battery remaining still seems crazy to me.
Do you have the real parameters to enter for EVE280 cells (SOC-0% Volt(V) &
SOC-100% Volt(V) ).
Thanks